Image Name
language

    Don't have an account? Please register

    Join us quickly and enjoy exclusive services

    Register

    Click to Login

    Product Center
    Product Center
    Product Center

    Integral short drill string

    +
    • 30.jpg
    Image Name

    Product categories

    • Product Description
    • Material download
      • Commodity name: Integral short drill string

      Short drill collars are mainly used to adjust the position of bottom-hole drilling tools and improve the function of bottom-hole drilling tools. Their mechanical properties are the same as drill collars, but their length is relatively short and can be determined according to requirements.

      Short drill collars are primarily used to adjust the position of bottom-hole drilling tools and improve their functionality. Their mechanical properties are the same as standard drill collars, but they are shorter in length, determined as needed.

       

    Online inquiry

    If you are interested in this product, please fill out the following form and send your needs to us, and we will reply to you as soon as possible!

    If the inquiry content is short, you can briefly describe it here. If the content is long, you can upload the inquiry form below or send the inquiry directly to our company's email address.

    Click to upload

    Please upload jpg images within 5M

    yzm
    Submit
    %{tishi_zhanwei}%

    Related Products

    Image Name

    Reduced torsion short section

    The purpose of a downhole torque reducer is to reduce excessive torque generated during drilling in short-radius horizontal sections and high-angle well sections. It is mainly connected in short-radius horizontal sections and high-angle well sections. It is recommended to connect one torque reducer every 60 feet. After its use, the torque can be reduced by 25-35%. Its spiral inner sleeve, straight outer sleeve and core shaft are in a relatively non-rotating state.

    Image Name

    Clean short section

    The main purpose of the cleaning pup joint is to remove cement, sand, residual bullets from perforating, scratches, paraffin, burrs, and other attachments from the inner wall of the downhole casing, to keep the inner wall of the casing clean, so that various downhole tools can be run. It is commonly used in horizontal wells and large displacement well sections. Its double helix structure can effectively remove internal wall debris, and at the same time, wear-resistant materials can effectively extend the drill pipe's service life.

    Image Name

    Drill string transition joint

    Conversion connectors are mainly used to connect drilling string components during oil, gas, and geological drilling operations, serving as one of the primary tools for connecting upper and lower drilling tools.

    Image Name

    Float valve connector

    Floating valve connectors are essential tools in oil drilling. A floating valve connector is a drill string connector, mainly including drill bit floating valve connectors and drill string floating valve connectors. Its main functions are: to prevent drilling cuttings and sand from being carried into the drill bit water eyes when connecting single strings; and to prevent well blowout accidents in the drill string when a well blowout or surge occurs. The floating valve assembly cover automatically closes the water eyes to prevent well blowout accidents in the drill string.

    搜索历史清除全部记录
    最多显示8条历史搜索记录噢~
    All
    • All
    • Product Management
    • News
    • Introduction
    • Corporate Outlets
    • FAQ
    • Corporate Video
    • Corporate Brochure
    Search