OUR PRODUCTS
OUR PRODUCTS
OUR PRODUCTS
>
>
>
MECHANICAL EXTERNAL CUTTER

MECHANICAL EXTERNAL CUTTER

机械外割刀

PRODUCTS

产品分类

  This type of mechanical external cutter is a mechanical cutting tool that cuts from the outside of casing, tubing, drill pipe, etc. It can cut from outside of pipe and take out the cutting section, it uses spring automatic running, and avoid accident by driller’s negligence which cause excessive pulling force and destroy cutter. It is normally connected with washover pipe, so as to cut and take out the pipe at proper position, it needs to change different cutter for different spec. pipes and change the corresponding clamping sleeve.

Inquiry

If you are interested in this product, please fill out the form below and send us your needs, and we will reply to you as soon as possible!

If the content of inquiry is less, you can simply describe it here. If the content is more, you can upload the inquiry below or directly send to our E-mail.

(a single file cannot exceed 5m, and can support. Doc,. XLS,. PDF,. TXT,. Zip,. JPG, etc.)
    There is currently no content to display
    Please add data record on website background.
    Releated Products
    WASHOVER PIPE

    WASHOVER PIPE

      The washover pipe is a necessary tool for performing washover operation, and washover operation can relieve various of sticking accidents in the well. In addition to rotary washover function, it can also sand washover, salt washover,hot washing and deblockingetc.

    CASING SWAGE

    CASING SWAGE

      Casing swage is one special tool to repair slightly deformed casing which use for oil, gas and water well, recover the original casing drift diameter to meet various requirement of downhole operation.Casing swage can repair slightly deformed casing, maximum up to 98%. It consists of eccentric shaft, top roller, middle roller, bottom roller, taper roller and plug.With the advantages of easy to operate and control, wide range of application, harmless to casing, effectively solvethe deformed casing and resume production timely.

    MULTI-FUNCTION CASING SCRAPER

    MULTI-FUNCTION CASING SCRAPER

      Multi-function casing scraper is a new type casing scraper, it can work as non-rotating fixed type casing scraper, and also can work as a rotating type casing scraper. Besides normal cleaning operation, it should stop running in the drill string when stuck, then should connect the washover tools, and applying some pull force to shear the pin, then shift to rotating mode, then proceed releasing stuck operation, like providing a torque, pushing, circulation and jarring until recover the normal situation, then continue to run in drill string.

    JY CASING SCRAPER

    JY CASING SCRAPER

      JY casing scraper can work as non-rotating fixed type casing scraper, and also can work as a rotating type casing scraper. When it used as fixed casing scraper, as long as increase adjustable pad locates in top sub to make it not rotate, otherwise decrease adjustable pad, it will be used as rotating casing scraper. It is mainly used in cleaning cement, sandy, residual bullets, scratches, paraffin, burs and other attachments from inner wall of casing, in order to keep inner wall of casing clean.

    © 2021 HEILONGJIANG NORTH SHUANGJIA DRILLING TOOLS CO., LTD.   黑ICP备16001467号-3