OUR PRODUCTS
OUR PRODUCTS
OUR PRODUCTS

CUP TESTER

试压堵塞器

PRODUCTS

CEMENTING TOOLS
产品分类

  Cup tester is mainly used in casing pressure testing. For oil, gas and water well that have been run in casing and equipped with wellhead device, it can layer pressure testing one time for casing and BOP system. It can also be used for casing pressure test in pipe yard of mine yield. The pressure testing process is very convenient as long as put the cup tester into the casing.

Inquiry

If you are interested in this product, please fill out the form below and send us your needs, and we will reply to you as soon as possible!

If the content of inquiry is less, you can simply describe it here. If the content is more, you can upload the inquiry below or directly send to our E-mail.

(a single file cannot exceed 5m, and can support. Doc,. XLS,. PDF,. TXT,. Zip,. JPG, etc.)
    There is currently no content to display
    Please add data record on website background.
    Releated Products
    MECHANICAL EXTERNAL CUTTER

    MECHANICAL EXTERNAL CUTTER

      This type of mechanical external cutter is a mechanical cutting tool that cuts from the outside of casing, tubing, drill pipe, etc. It can cut from outside of pipe and take out the cutting section, it uses spring automatic running, and avoid accident by driller’s negligence which cause excessive pulling force and destroy cutter. It is normally connected with washover pipe, so as to cut and take out the pipe at proper position, it needs to change different cutter for different spec. pipes and change the corresponding clamping sleeve.

    MECHANICAL INTERNAL CUTTER

    MECHANICAL INTERNAL CUTTER

      Mechanical internal cutter is a tool which is used for cutting downhole fixed (or stuck) pipe from inner of casing, it can work at any place except joint and coupling.

    MARINE CASING CUTTER

    MARINE CASING CUTTER

      Marine casing cutter is one of tools which cuts the casing internally. It uses water horsepower to drive cutters work, it has reasonable structure and convenient maintenance, faster cutting speed. When cutting multi-layer non-concentric casings, it could bear strenuous vibration. Strong cutter arms can extend to 5 times as much as body diameter, so as to get maximum stability performance under various adverse cutting condition (including hard point, decentration, discontinuous cutting etc).

    CASING SCRAPER

    CASING SCRAPER

      Casing scraper is mainly used in cleaning cement, sandy, residual bullets, scratches, paraffin, burs and other attachments from inner wall of casing, to keep inner wall of casing clean,so as to run into various downhole tools.

    © 2021 HEILONGJIANG NORTH SHUANGJIA DRILLING TOOLS CO., LTD.   黑ICP备16001467号-3