Image Name
language

    Don't have an account? Please register

    Join us quickly and enjoy exclusive services

    Register

    Click to Login

    Product Center
    Product Center
    Product Center

    CIRCULATING SUB

    +
    • 循环头1(489).jpg
    • 循环头2(486).jpg
    • 循环头3(487).jpg
    Image Name

    Product categories

    • 产品描述
      • Commodity name: CIRCULATING SUB
      • Commodity ID: 1457329122513145856

      Circulating head is a crossover sub installed on the top of drill pipe, It is connected with circulating system through union for circulating drilling fluid. The sub has always 2″LP pin connection up, connecting circulating system; and drill pipe pin down , connecting drill pipe. Union is to be ready by user.

      Circulating head is a crossover sub installed on the top of drill pipe, It is connected with circulating system through union for circulating drilling fluid. The sub has always 2″LP pin connection up, connecting circulating system; and drill pipe pin down , connecting drill pipe. Union is to be ready by user.

    Online inquiry

    If you are interested in this product, please fill out the following form and send your needs to us, and we will reply to you as soon as possible!

    If the inquiry content is short, you can briefly describe it here. If the content is long, you can upload the inquiry form below or send the inquiry directly to our company's email address.

    Click to upload

    Please upload jpg images within 5M

    yzm
    Submit
    %{tishi_zhanwei}%

    Related Products

    Image Name

    TORQUE REDUCTION SUB

    　　Torque reduction sub is to reduce the excessive torque generated by drilling in short radius horizontal section and large angle well section. It is mainly connected between short radius horizontal section and large angle well section, propose to connect a torque reduction sub by every 60ft, it can reduce 25-35% torque after using this tool, it’s slip spiral inner sleeve, straight rib outer sleeve and body mandrel are relatively in non-rotating condition.

    Image Name

    HYDRO CLEANER

    　　The main purpose of hydro cleaner is to remove cement, sand, residual bullets after perforation, scratches, paraffin, burrs and other objects remaining on the inner wall of casing, keep the inner wall of casing clean so that it can run in various downhole tools. Normally used in horizontal wells and extended reach well. Its double spiral blades structure can effectively remove debris on inner wall, and at the same time, the hardfacing material can effectively improve service life of drill pipe.

    Image Name

    CROSSOVER SUB

          Crossover sub acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work. It is used mainly for connecting of upper drill tools and lower drill tools.

    Image Name

    FLOAT VALVE SUB

          Float valve is a necessary tool of oil drilling. The float valve sub is a bit sub, and mainly includes near bit float valve sub and string float valve sub. The function is to prevent the mud from bring the drilling cuttings, the silt reverse flow; the bit wellbore is jammed; when blowout, float valve assembly close the wellbore automatically to prevent from spouting in the pipe.

    搜索历史清除全部记录
    最多显示8条历史搜索记录噢~
    All
    • All
    • Product Management
    • News
    • Introduction
    • Corporate Outlets
    • FAQ
    • Corporate Video
    • Corporate Brochure
    Search